Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon 5G Internet Gateway (LVSKIHP)
Restore Settings to Factory Defaults

2026-10-15 05:15:41.148

Verizon 5G Internet Gateway (LVSKIHP)
Restore Settings to Factory Defaults

Reset your Verizon 5G Internet Gateway (LVSKIHP) to factory settings as a final troubleshooting step, or to reconnect it to a new router.

Before you begin

A reset to factory default deletes all changes made to the configuration and connected clients (e.g., Network Name (SSID), Wi-Fi/Admin Password, etc.) need to reconnect

External

  1. From the bottom of the router, locate the Reset pin hole.
  2. Insert a paper clip then press and hold the
    Reset button
     for at least 5 seconds with the Gateway powered on.
    If a backup was done prior to the reset, perform a restore if desired.
    Reset pin hole

Admin WebGUI

  1. Sign in to the Admin WebGUI.
    You must be connected to the 5G Internet Gateway to access the admin page.
  2. From the Router Home screen, click
    System Settings
    .
    System Settings
  3. From the General Information screen, click
    Backup & Restore
    .
    Backup and Restore
  4. From Backup & Restore, click
    Restore Factory Defaults
    .
    If a backup was done prior to the reset, you can restore your router settings.
    Restore Factory Defaults

Manually Connect to Wi-Fi