Session status messages
Session Status
Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below. Due to inactivity, your session has expired. Please sign in again to continue.

Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Orbic SPEED X 5G
Configure Broadcast Settings

Here's how to check settings if you're having issues connecting devices to your Orbic® SPEED X 5G.

Before you begin

To avoid interference with other Wi-Fi networks, try using a different channel.

You can also set the band for your primary and guest Wi-Fi networks from the device by navigating:

Wi-Fi

Band Selection

From the Wi-Fi section, click the

Arrow icon

to open the Wi-Fi page.

From the Band Section section, select the preferred option for the 2.4 GHz and 5 GHz bands.

Primary Network

Guest Network

OFF

To configure, click the corresponding

Dropdown arrow icon

for each band then set any of the following:

802.11 Mode

Channel

Channel (e.g., Auto, 1, 2, 10, 11, etc.)

Click

Save Changes