Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Stream TV Soundbar - Set Up via Wired Connection

2026-10-15 04:20:30.012

Stream TV Soundbar - Set Up via Wired Connection

Here's how to set up your Stream TV Soundbar via wired internet connection (Ethernet cable).
Before you start, confirm you have:
  • an internet connection.
  • a Google™ (Gmail™) account.
    If you don't already have a Google account or have trouble logging in, visit this Google site for help.
  1. Connect an Ethernet cable from the soundbar device to an available Ethernet port on your router.
    Ethernet cable not included.
    To set up without an Ethernet cable, refer to Stream TV Soundbar - Set Up Device.
  2. Connect the HDMI cable from your soundbar to your TV.
  3. Connect the power cord from your soundbar to an electrical outlet.
  4. Turn on your TV then set it to the correct HDMI input.
    Refer to the TV manufacturer for help.
  6. If prompted, select
    Begin
     to set up your remote to control the volume on your TV then follow the on-screen prompts.
    Utilize the 5-way navigation pad on the remote to highlight and the center (OK) button to select.
    To skip, press the
    Back button
     Back button on the remote  on the remote twice.
  7. From the 'You're connected using Ethernet' screen, select
    Continue
    .
  8. If necessary, wait for your Stream TV to install system updates.
    This takes a few minutes and your device will restart multiple times.
  9. If prompted, select
    OK
     from the 'A remote control software update is available' screen.
    Firmware update may take a few minutes. If prompted, select
    OK
     from the 'Your remote control software is up to date' screen.
  10. From the 'Sign in to your Verizon account' screen, do one of the following:
    If you select 'Skip', you can sign in to your Verizon account at a later time.
    • Sign in using your phone or computer
      If you're connected to a Wi-Fi network that features host isolation (e.g., guest networks, etc.) sign in using your remote.
      1. Make sure your device is connected to the same Wi-Fi network as your Stream TV.
      2. On the phone or computer, open a web browser and go to https://stream.verizon.com/activate.
        If using a smartphone, scan the QR code shown on the TV screen with a QR code reader.
      3. Enter the code shown on your TV screen on the website where prompted.
      4. If prompted, enter your My Verizon User ID or mobile number and Password, then select
        SIGN IN
        .
    • Sign in using your remote
      1. Select
        Use remote instead
        .
      2. Enter your My Verizon User ID or mobile number then select the
        Enter icon
        .
      3. Enter your My Verizon password then select the
        Enter icon
        .
  11. If prompted, enter the answer to your secret question then select
    Continue
    .
  12. To continue, review the Terms of service, End user license agreement, and Privacy policy then select
    Accept all
    .
  13. From the 'Name your device' screen, select the desired name then select
    Continue
    .
    Name selected when circle to the right is white.
  14. Review the 'Get more from your Stream TV with Google' screen select
    Continue
    .
  15. From the 'Make the most of your TV' screen select
    Sign In
     then do the following:
    If you select 'Skip', you can add a Google account at a later time.
    1. Enter your Google account email address then select the
      Next icon
       Next icon.
    2. Enter your Google account password then select the
      Next icon
      .
  16. From the 'Google Terms of Service' screen select
    Accept
    .
  17. From the 'Google Location' screen select
    Yes
    .
  18. From the 'Google Help improve Android' screen select
    Yes
    .
  19. From the 'Install additional apps' screen, select (check) any desired apps then select
    Continue
    .
    Choose 'Install all of the following apps' to select all the apps on the Recommended list.
  20. Press the
    Center (OK) button
     to view each of the 'Features of your device' screens and to exit set up.
For additional info, see the Stream TV support page.