Arlo Go 2 LTE Security Camera - Install Device Software Updates
Here's how to check for and install software updates on your Arlo Go 2 security camera.
Don't disconnect your camera, open the battery door or remove the battery while the firmware update is in progress. Doing so may damage it.
- Firmware updates are released automatically to all connected Arlo devices.
- Automatic updates occur between 3:00 a.m. and 5:00 a.m. to minimize camera downtime.
- If the firmware update is a major one, you might be unable to stream from your camera until your firmware is updated.
You can wait for the automatic update, or you can update manually following these steps:
- Open the Arlo app or navigate and sign in to the Arlo web portal at https://arlo.netgear.com/ via a browser.The Arlo web portal doesn't support Internet Explorer®. For more info visit Arlo system requirements.If necessary, install the Arlo app.
- From the Devices tab, tap or click theSettings icon
(to the right of the desired camera name).
- Tap or clickDevice Info.May require scrolling to the bottom.
- Tap or clickFirmware.
- Tap or clickUpdate.The camera's LED blinks blue and amber while the firmware is downloading and installing.Allow several minutes for the process to complete.