Arlo Go 2 LTE Security Camera - Manage a Wi-Fi Network
Here's how to add or modify a Wi-Fi network for your Arlo Go 2 security camera.
- The Arlo Go 2 can only connect to a 2.4 GHz Wi-Fi network.
- Before you begin, ensure your smartphone or computer is connected to the same 2.4 GHz Wi-Fi network being added to the camera.
- The Wi-Fi Network can be turned off or changed but can't be removed unless the device is reset.
A factory data reset resets the security camera's feed and all device settings. Only perform a reset if absolutely necessary.
- Open the Arlo app or navigate and sign in to the Arlo web portal at https://arlo.netgear.com/ via a browser.The Arlo web portal doesn't support Internet Explorer. For more info visit Arlo system requirements.If necessary, install the Arlo app.
- From the Devices tab, tap or click theSettings icon
(to the right of the desired camera name).
- Tap or clickConnected to.
- Tap or clickWiFi Network.
- From the 'Connect to a 2.4 GHz network' screen, tap or clickContinue.If a Wi-Fi network was previously added, tap or clickChange Network.Only one Wi-Fi network can be saved at a time.
- From the 'Enter your WiFi credentials' screen, enter the SSID and Password then tap or clickContinue.The SSID and password are case-sensitive.
- Press the button to release the housing on your Arlo Camera.
- Press and release the Sync button located on the inside of the camera then tapContinue.
- From the 'Did the light on the front of your Arlo Camera start blinking blue?' screen, tapContinue.
- Hold the QR code displayed on your browser or app screen in front of your Arlo camera until you hear a chime then tap or clickContinue.
- Allow a few minutes for the camera to sync to the Wi-Fi network.