Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Smart Wrist by Orbic - Set Date and Time

2026-10-15 07:45:26.436

Smart Wrist by Orbic - Set Date and Time

If your Smart Wrist shows the incorrect date and / or time, here's how to correct it.
Ensure the software on your Smart Wrist™ by Orbic® is up to date as the steps below apply to the most recent version.
  1. From the watch screen, press the
    Power / Home button
     to open the apps screen.
    Power Home button
  2. Tap the
    Settings icon
     Settings icon.
  3. Tap
    Time
    .
  4. To use network-provided values, tap the following to turn on :
    • Auto Settings
  5. When manually setting data & time, perform the following:
    You must turn off Switch off icon 'Auto Settings' to manually adjust date and time.
    1. Tap
      Set date
      .
    2. Select the month, date and year then tap the
      OK
       to set.
      To select, scroll up or down then tap the appropriate option.
    3. Tap
      Set time
      .
    4. Select the hour, minute and am / pm then tap
      OK
      to set.
      To select, scroll up or down then tap the appropriate option.
    5. Tap
      Select Time Zone
      .
    6. To select, scroll up or down then tap the appropriate option.
  6. If desired, tap
    Use 24-Hour Format
     to turn on or off Switch off icon.