Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Smart Wrist by Orbic - Add / Remove a Wi-Fi Network

2026-10-15 07:46:32.939

Smart Wrist by Orbic - Add / Remove a Wi-Fi Network

Here's how to connect to a Wi-Fi network or remove a saved connection on your Smart Wrist.
Ensure the software on your Smart Wrist™ by Orbic® is up to date as the steps below apply to the most recent version.
  1. From the watch screen, press the
    Power / Home button
    .
    Power Home button
  2. Navigate:
    Settings
    Wi-Fi
     .
  3. Ensure
    Wi-Fi
     is turned on.
  4. Do any of the following:
    • Connect to a available network:
      1. Tap the desired available Wi-Fi connection.
      2. Tap one of the following:
        • Type on the Phone
          If this option is selected, open the Orbic Wear app on your smartphone and when prompted enter the Wi-Fi password, then tap
          OK
           to connect.
        • Type on the Watch
      3. Enter the Password (if required) on the digital keyboard on the watch then tap the
        Done icon
         Done icon .
      4. Tap
        Connect
        .
    • Remove a Wi-Fi connection:
      1. Tap the desired Wi-Fi connection.
      2. Tap
        Ignore Network
        .
      3. From the 'Cleared network....' screen, tap
        Clear
         to confirm.
        To cancel, tap
        Cancel
        .