Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

KYOCERA DuraForce PRO 2 - Power Up in Safe Mode

2026-10-15 05:16:32.687

KYOCERA DuraForce PRO 2 - Power Up in Safe Mode

Safe mode is a diagnostic state on your DuraForce Pro 2 that only runs system apps so you can isolate if a third-party app is causing freezing or slowness.
  1. Ensure the device is powered off.
    An alternate method is available if the device can be powered on and is responsive.
  2. Press and hold the
    Power button
     until the Kyocera logo appears, then release.
    Kyocera logo appears on the screen in approximately 5 seconds..
  3. With the Kyocera logo on screen, press and hold the
    Volume Down button
    .
  4. Continue to hold the
    Volume Down button
     until Safe mode appears in the lower left of the screen then release.
    This may take up to 45 seconds.