Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL LINKZONE GO 5G
Configure Broadcast Settings

2026-10-15 12:26:27.928

TCL LINKZONE GO 5G
Configure Broadcast Settings

Adjust Wi-Fi broadcast settings (e.g., channel, band, etc.) on your LINKZONE GO 5G to reduce interference, improve connection and ensure better performance.

Before you begin

To avoid interference with other Wi-Fi networks, try using a different channel.

Steps

  2. From the Wi-Fi section, click the
    Navigation arrow
    .
  3. From the left pane, click
    Wi-Fi
     then click
    Advanced
    .
  4. To configure, click the corresponding
    Dropdown arrow icon
     for each band then set any of the following:
    • Wi-Fi Mode (e.g., Auto, 802.11ac, etc.)
    • Channel Bandwidth (e.g., 20MHz, 80MHz, etc.)
    • Channel (e.g., Auto, 36, 149, 161, etc.)
  5. Click
    Apply
    .