Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Orbic JOY 2 - Add / Remove a Wi-Fi Connection

2026-10-15 12:24:14.238

Orbic JOY 2 - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your JOY 2.
  1. Open the
    Settings app
     on your Orbic® JOY 2.
  2. Navigate:
    Network & internet
    Internet
    .
  3. Ensure the Wi-Fi switch is turned on.
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the preferred network.
      2. Enter the applicable password then tap
        Connect
        .
        To view the password as it is being entered, tap (check)
        Show password
        .
        If necessary, tap
        Advanced options
         to ensure any additional settings (e.g., Proxy settings, IP settings, etc.) are configured appropriately.
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
        .
      2. From the Network name (SSID) field, enter the appropriate name.
      3. Tap the Security field
        dropdown menu
         .
      4. Tap the applicable security option (e.g., None, WEP, WPA/WPA2-Personal, etc.).
      5. If necessary, tap
        Advanced options
         to enable any additional settings (e.g., Proxy settings, IP settings, etc.).
      6. Enter the applicable password then tap
        Save
        .
    • Remove a Wi-Fi Connection
      1. Tap the
        Gear icon
         Gear icon next to the network being removed.
      2. Tap
        Forget
        .