Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Internet Gateway (WNC-CR200A)
LED Status Indicators

2026-10-15 05:17:40.802

Verizon Internet Gateway (WNC-CR200A)
LED Status Indicators

The LED lights on your Internet Gateway (WNC-CR200A) indicate its power or connection status. A quick glance shows whether it's working properly or needs attention.

Before you begin

After plugging it in for the first time, the Verizon Internet Gateway should take approximately 8-10 minutes to connect to our network. You may see the System LED pulsing white during this time. After 10 minutes the following table indicates the correct status.
You can also manually initiate Setup Mode by holding the WPS button for 5 seconds then release (the Wi-Fi LED on the front will have a slow blinking blue light to indicate device is in Setup mode). Setup mode remains in place for approximately 45 minutes. If the Gateway’s LED indicator blinks red, repeat setup.
Front LED
System LED Status Indicators
Function
Status
LED Pattern
Bootup
Software updating
Fast blinking white
System booting
Soft pulsing white
Other
Factory reset
Fast blinking yellow
Gateway error
Soft pulsing red
Activation error
Slow blinking red
Gateway has no signal
Solid red
Signal LED Status Indicators
Function
Status
LED Pattern
3 Bars
Excellent signal strength
Solid white
2 Bars
Good signal strength
Solid white
1 Bar
Fair signal strength
Solid white
Wi-Fi LED Status Indicators
Function
Status
LED Pattern
Regular usage
Passing signal / Setup complete
Solid white
No internet
Solid red
Wi-Fi disabled
Solid green
Pairing
WPS Pairing
Slow blinking blue
Successful WPS connection
Fast blinking blue
WPS connection timed out
Fast blinking red
WPS Connection failed
Slow blinking red
Other
Gateway error
Soft pulsing red