Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Internet Gateway (WNC-CR200A)
Establish Wired Connection

2026-10-15 05:13:19.833

Verizon Internet Gateway (WNC-CR200A)
Establish Wired Connection

Connecting via Ethernet provides a more stable and reliable connection to your Internet Gateway (WNC-CR200A). It reduces lag, minimizes interference and ensures consistent speeds for activities like gaming, streaming and video conferencing.

Steps

  1. Plug one end of the Ethernet cable into any of the 2 gray Ethernet (LAN) ports on the bottom of the Internet Gateway.
    Bottom ports
  2. Plug the other end of the Ethernet cable into an Ethernet port on a computer.
  3. If necessary, power on the router and/or computer.
    Allow adequate time for both to power up and the computer to detect the Ethernet connection.
  4. From the computer, open a web browser to test connectivity.
    A successful Ethernet / hard-wired connection verifies the device is online and connected to the Internet. If an issue happens during Wi-Fi connection, troubleshoot the Wi-Fi settings of the router and the device being connected.
    If testing fails, try replacing your Ethernet cable and try to test the connection again.