Session status messages
Session Status
Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below. Due to inactivity, your session has expired. Please sign in again to continue.

Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL LINKZONE 5G UW - Configure Broadcast Settings - Mobile / Wi-Fi Hotspot

Here's how to check settings if you're having issues connecting to your LINKZONE 5G UW.

To avoid interference with other Wi-Fi networks, try using a different channel.

From the Wi-Fi section, click the

navigation arrow

(lower-right) to open the Wi-Fi page.

From the Basic section, tap the switch to turn the following networks on switch on icon

or off

2.4GHz Band

5GHz Band

From the left pane, click

Advanced

(in the Wi-Fi section).

For the 2.4 GHz Band Settings, click the

Channel dropdown

then select the desired channel (e.g., Auto, 1, 2, 10, 11, etc.).

For the 5GHz Band Settings, click the dropdown for any of the following:

Wi-Fi Mode

Channel Bandwidth

Channel

Click

Apply

You can also set the band for your 'primary' and 'guest' Wi-Fi networks from the device by navigating:

Wi-Fi

Band Selection