Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

ORBIC JOY - Add / Remove a Wi-Fi Connection

2026-10-15 06:54:41.814

ORBIC JOY - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your ORBIC JOY.
  1. Open the
    Settings app
     Settings icon on your ORBIC® JOY.
  2. Navigate:
    Network & internet
    Wi-Fi
    .
  3. Ensure the Use Wi-Fi switch (upper-right) is turned on On icon.
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. From the Wi-Fi networks section, tap the preferred network.
      2. If prompted, enter the appropriate password then tap
        Connect
        .
        To view the password as it is being entered, tap (check)
        Show password
        .
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
        .
      2. From the Network name (SSID) field, enter the appropriate name.
      3. Tap the 'Security field'
        dropdown menu
         .
      4. Tap the applicable security option (e.g., None, WEP, WPA/WPA2-Personal, etc.).
      5. If necessary, tap
        Advanced options
         to enable any additional settings (e.g., Proxy settings, IP settings, etc).
      6. From the Password field, enter the appropriate password then tap
        SAVE
        .
    • Remove a Wi-Fi Connection
      1. Touch and hold the Wi-Fi network.
      2. Tap
        Forget
        .