LG Stylo 6 - Add / Remove Fingerprint Recognition
Here's how to set up and manage fingerprint recognition to unlock your Stylo 6.
For the fingerprint scanner on your LG Stylo™ 6 to operate, hands must be clean and moisture-free.
- From a Home screen, navigate: .These instructions apply to Home Mode only.
- TapFingerprints.
- Enter your current PIN, pattern or password.
- Perform one of the following:
- First Time Setup
- From the 'Unlock your phone with your fingerprint' screen, tapNext.If necessary, enter your current PIN, pattern or password then tapOK.
- Follow the on-screen demo to add your fingerprint, place your finger on thefingerprint sensor(back of the device), lift it slightly then place a different part of your finger on the sensor.
- Once the 'Fingerprint added' screen appears, tapOK.
- Tap any of the following to turn on
or off
:
- Screen lock: Unlock screen with your fingerprint.
- Content lock: Show locked content in Gallery and QuickMemo+ with your fingerprint.
- Add More Fingerprints
- TapAdd fingerprint.Up to 5 fingerprints can be registered on the device.
- Follow the on-screen demo to add your fingerprint, place your finger on thefingerprint sensor(back of the device), lift it slightly then place a different part of your finger on the sensor.
- Once the 'Fingerprint added' screen appears, tapOK.
- Remove Fingerprint(s)
- Tap theDelete icon
to the right of the fingerprint you wish to remove.
- TapDeleteto confirm.