Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Wireless Home Phone (LVP2) - Insert / Remove SIM Card

2026-10-15 09:56:53.643

Wireless Home Phone (LVP2) - Insert / Remove SIM Card

Here's how to properly insert or remove the SIM card for your Wireless Home Phone (LVP2).

Insert SIM Card

Do not attempt to insert/remove the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.
The Wireless Home Phone (LVP2) comes with the SIM card installed.
  1. Ensure the device is powered off.
    Power button
  2. Remove the battery cover.
    Remove the battery cover
  3. With the gold contacts facing down, align the card (notch first) then gently push the card in until it clicks into place.
  4. Replace the battery cover.
    Close the battery cover

Remove SIM Card

  1. Ensure the device is powered off.
    Power button
  2. Remove the battery cover.
    Remove the battery cover
  3. Gently push in on the card, then carefully pull out the SIM card.
    The SIM card slot is spring-loaded, which utilizes a push-push type SIM card slot.
    If applicable, refer to Insert the SIM Card section above.
  4. Replace the battery cover.
    Close the battery cover