Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

motorola razr - Add / Remove Fingerprint Recognition

2026-10-15 06:09:46.338

motorola razr - Add / Remove Fingerprint Recognition

Here's how to set up and manage fingerprint recognition to unlock your razr.
For the fingerprint scanner to operate, hands must be clean and moisture-free.
  2. From a Home screen, navigate:
    Settings Settings icon
    Security
    .
  3. From the DEVICE SECURITY section, tap
    Fingerprint
    .
  4. Enter the current PIN, password or pattern.
  5. Perform one of the following:
    • First Time Setup
      1. From the 'Unlock with your fingerprint' screen, review the info then tap
        Setup
         (lower-right).
      2. Tap the
        fingerprint sensor
         (bottom of phone) then follow the on-screen instructions.
      3. Place your finger on the
        fingerprint sensor
         until it vibrates then lift it and repeat this step until the process is complete.
      4. Tap
        Done
         (lower-left).
    • Add More Fingerprints
      1. Tap
        Add fingerprint
        .
        Up to 5 fingerprints can be registered on the device.
      2. Place your finger on the
        fingerprint sensor
         until it vibrates then lift it and repeat this step until the process is complete.
      3. Tap 'Done' if finished or 'Add another' to continue adding fingerprints.
    • Remove Fingerprint(s)
      1. Tap the
        Delete icon
         Delete icon to the right of the fingerprint you want to remove, then tap
        Delete
        .
      2. If presented with 'Remove all fingerprints?', tap
        Yes, remove
         if desired.