Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kazuna eTalk ™ - Manage Hotspot Settings

2026-10-15 09:02:44.307

Kazuna eTalk™ - Manage Hotspot Settings

Here's how to configure the hotspot settings (e.g., password, network name, etc.) on your eTalk.
  1. From the main screen, select
    Menu
    .
  2. Utilize the 5-way navigation pad to highlight and the center button to select.
    5-way Navigation Pad
  3. Select
    Tools & Settings
    .
  4. Select
    Wireless & networks
    .
  5. Select
    Tethering & Hotspot
    .
  6. Select
    Mobile hotspot
     and choose one of the following options:
    • On
    • Off
  7. Press the
    right soft key
     to choose Options then select
    Setup Mobile Hotspot
    .
    Mobile Hotspot must be on to access setup.
  8. From the Setup Mobile Hotspot screen, configure the following as needed:
    • Network name (SSID)
    • Security (e.g., None, WPA2 PSK)
    • Password
      To change the password:
      1. Highlight the 'Password' field, enter the password then select
        OK
        .
      2. Press the
        left soft key
         to choose Save.
        The new password must be entered on the connecting device.
    • Show password
      Enabled when a green check mark is present.
  9. Scroll down and highlight the 'Select AP Band' section then select from the available option(s) (e.g., 2.4 GHz Band).
  10. Press the
    left soft key
     to choose Save.