Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

KYOCERA DuraForce PRO 2 - Add / Remove a Wi-Fi Connection

2026-10-15 05:17:44.472

KYOCERA DuraForce PRO 2 - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your DuraForce PRO 2.
  1. From a Home screen, navigate:
    Apps
    Settings
    Network & internet
    .
  2. Tap
    Wi-Fi
    .
  3. Ensure the Wi-Fi switch is turned on On Switch.
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the preferred Wi-Fi network.
      2. Enter the appropriate password then tap
        Connect
        .
        To view the password as it is being entered, tap (check)
        Show password
        .
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
         (scroll down if needed).
      2. From the Network name field, enter the appropriate name.
      3. From the Security field, tap the
        Dropdown menu
         .
      4. Tap the applicable security option (e.g., None, WEP, WPA/WPA2-Personal, etc.).
      5. From the Password field, enter the appropriate password then tap
        SAVE
        .
    • Remove a Wi-Fi Connection
      1. Tap and hold the Wi-Fi network you wish to remove.
      2. Tap
        Forget network
        .