Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

ZTE Cymbal LTE - Insert / Remove Battery

2026-10-15 04:32:27.151

ZTE Cymbal LTE - Insert / Remove Battery

Here's how to insert / remove the battery for your Cymbal.
  1. Ensure your ZTE Cymbal® LTE is powered off.
  2. Using the notch (located on the lower-left edge, when the device is face down) gently lift and remove the battery cover.
    Remove battery cover
  3. Do one of the following:
    • Insert battery:
      Align the gold battery contacts with the contacts in the battery compartment then gently press the battery into place.
      Insert battery
    • Remove battery:
      From the notch in the upper edge of the battery compartment, lift and remove the battery.
      Remove battery
  4. Align the battery cover then gently press to snap the cover into place.