Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

ZTE Cymbal LTE - Insert / Remove SIM Card

2026-10-15 06:09:31.178

ZTE Cymbal LTE - Insert / Remove SIM Card

Here's how to properly insert or remove a SIM card for your Cymbal.
Don't attempt to insert or remove the SIM card while your ZTE Cymbal® LTE is powered on. Doing so may harm the SIM card and / or device.
  1. Using the notch (lower-left edge, when the device is face down) gently lift and remove the battery cover.
    Remove battery cover
  2. From the notch in the upper edge of the battery compartment, lift and remove the battery.
    Remove battery
  3. Do one of the following:
    • Insert SIM card
      With the gold contacts facing down, align the card (notch first) then slide the SIM card in.
      Insert SIM
    • Remove SIM card
      Press the soft block down and slide the SIM card out.
      Remove SIM
  4. Align the battery cover then gently press to snap the cover into place.