Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Software Upgrade Assistant
Kyocera Software Update

2026-10-15 05:16:18.034

Software Upgrade Assistant
Kyocera Software Update

Get the latest software for your Kyocera device when over-the-air updates fail. Use the Software Upgrade Assistant (SUA) on your computer to install essential updates.

Before you begin

The Software Upgrade Assistant (SUA) must be installed on a compatiable computer.
Ensure your device is powered on and unlocked, then connect it to a computer using the supplied USB cable.
The software upgrade process may take up to 30 minutes. Don't disconnect the device from the computer or power off the device until the update completes.
The most recent software version becomes available on the SUA/SRA tool within a week of a new software update. During this time, the SUA/SRA is unavailable for usage.
If the update fails to install, refer to the Software Repair Assistant for further assistance.

Steps

  1. From the taskbar, right-click the
    Software Upgrade Assistant tray icon
    .
  2. From the Assistant Tools column, click
    Upgrade Assistant
    .
  3. Select the applicable device then click
    Upgrade
    .
    'Upgrade available' displays if a software update is available and 'Up to date' displays if the device software is current.
    A progress bar shows the status of the upgrade.
  4. Once software upgrade is complete, 'Upgrade Complete' displays above the Status Bar.
  5. Click
    Close
     to exit.